ʻO GSA-B Series Hoʻokahi Huli Biss Absolute Rotary Encoder
ʻO GSA-B Series Hoʻokahi Huli Biss Absolute Rotary Encoder
ʻO BiSS-C ka mana hou loa o BiSS. ʻO nā mana kahiko (BiSS-B) ʻaʻole pono. ʻO ka BiSS-C ka lako paʻa me ka SSI maʻamau akā i loko o kēlā me kēia pōʻaiapili ʻikepili e aʻo ai ka haku a hoʻopaʻi i nā lohi o ka laina e hiki ai i ka 10 Mbit/s ka nui o ka ʻikepili a me ka lōʻihi o ke kaula a hiki i 100 mika. Hiki i ka ʻikepili sensor ke komo i nā "channel" he nui no laila hiki ke hoʻouna ʻia nā ʻike kūlana a me ke kūlana i hoʻokahi kiʻi. Hoʻohana ʻo BiSS-C i ka CRC ikaika loa (Appendix) no ka ʻike ʻana i nā hewa o ka lawe ʻana. Housing Dia.:38,50,58mm; Paʻa/hollow Shaft Anawaena:6,8,10mm; Hoʻoholo: Hoʻokahi huli max.1024ppr/max.2048ppr; Interface:Biss; Code Output: Binary, Gray, Gray Excess, BCD;
Hoʻohana pinepine ʻia ʻo BiSS-C me ka unidirectionally e like me SSI. Kākoʻo ʻo BiSS-C i ke kamaʻilio ʻelua. Hiki ke hoʻololi ʻia nā ʻāpana me ka hoʻopau ʻole i ka lawe ʻana i ka ʻikepili sensor. He mea koʻikoʻi kēia no ka mana kikohoʻe i nā ʻōnaehana pane kaʻa. Hoʻomaopopo ʻo BiSS-C i ka pau ʻana o kahi pōʻai a hoʻohana i ka pae loiloi hope loa i ʻike ʻia ma ka laina uaki ma ke ʻano he mana/ʻikepili ʻikepili no ka hoʻonohonoho ʻana i nā ʻāpana e hiki ai ke ʻike ma luna o kekahi mau pōʻai.
Hoʻohana maʻamau ʻia ʻo BiSS-C i ka point-to-point akā kākoʻo pū kekahi i ka bussing. Ma ka hoʻonohonoho kaʻa kaʻa ua hoʻopili ʻia nā mea hana a pau i kahi kaulahao. No laila, loaʻa i kēlā me kēia kauā nā mea hoʻohui - BiSS-In a me BiSS-Out. ʻO ka laina o ka uaki ka mea i loaʻa i kēlā me kēia kauā i ka manawa like. ʻIkepili-Ma waho o ke kauā mua i pili i ka haku. ʻIkepili-Ma waho o ke kauā lua e pili ana i ka Data-In o ke kauā mua a pēlā aku. Ma kēia ʻano, hoʻopaʻa ʻia ka ʻikepili mai nā kauā a pau i ka haku i hoʻokahi kiʻi hoʻomau.
Nā palapala hōʻoia: CE, ROHS, KC, ISO9001
Ka manawa alakaʻi:I loko o hoʻokahi pule ma hope o ka uku piha; Hoʻouna ʻia e DHL a i ʻole e like me ka mea i kūkākūkā ʻia;
▶Ka Anawaena Hale:38,50,58mm;
▶Sal/hollow Shaft Diameter:6,8,10mm;
▶Iwaena: BISS;
▶Hoʻoholo: Hoʻokahi huli max.1024ppr/max.2048ppr;
▶Ka Voltage Hoʻolako: 5v,8-29v;
▶Waeo Hoʻopuka: Binary, Gray, ;
▶ Hoʻohana nui ʻia i nā ʻano like ʻole o ka mana a me nā ʻōnaehana ana, e like me ka hana ʻana i nā mīkini, ka hoʻouna ʻana, ka textile, ka paʻi ʻana, ka mokulele, ka ʻoihana koa i ka mīkini hoʻāʻo, elevator, etc.
▶ Kū'ē ka haʻalulu, kū'ē i ka corrosion, kū'ē i ka pollution;
| Nā hiʻohiʻona huahana | |||||
| Hale Noho.: | 38,50,58mm | ||||
| Dia. | 6,8,10mm | ||||
| ʻIkepili Uila | |||||
| Hoʻoholo: | Hoʻokahi huli max.1024ppr/max.2048ppr | ||||
| Ikepili: | BISS/NPN/PNP mea hōʻiliʻili wehe; | ||||
| Code huaʻōlelo: | Binary, ʻAhinahina, ʻAhinahina Nui, BCD | ||||
| Volta hoʻolako: | 8-29V | ||||
| Max. Pane pinepine | 30Khz | ||||
| Alanui Rotary | ccw | cw | |||
| Hoʻopuka | Hōʻike Huakaʻi | NPN Wehe Ohi | PNP Open Ohi | ||
| Huakaʻi Logic | Lokoʻo maikaʻi | Lokoʻino ʻino | |||
| Voltage Koe | Io=16mA | ≤0.4v | |||
| Io=32mA | ≤1.5v | ||||
| ʻO kēia manawa | 32mA Max | ||||
| MekanikaʻIkepili | |||||
| Hoʻomaka Torque | 0.01N•M | ||||
| Max. Hoʻouka ʻana i ka lāʻau | Axial: 5-30N, Radial: 10-20N; | ||||
| Max. Holoi Rotary | 3000rpm | ||||
| Kaumaha | 160-200g | ||||
| ʻIkepili Kaiapuni | |||||
| Temp hana. | -30~80 ℃ | ||||
| Waihona Temp. | -40~80 ℃ | ||||
| Papa Palekana | IP54 | ||||
| Alakaʻi Hoʻohui (1): | |||||||
| Pin | kalakala | Olelo Hooholo | |||||
| 1024 | 512 | 256/180 | 128/90 | 64 | 32 | ||
| 1 | Polū | 0V | 0V |
|
|
|
|
| 2 | Palaunu | 8V-29V | 8V-29V |
|
|
|
|
| 3 | ʻeleʻele | BIT1(20) | N/A |
|
|
|
|
| 4 | ʻulaʻula | BIT2(21) | BIT1(20) | N/A |
|
|
|
| 5 | Alani | BIT3(22) | BIT2(21) | BIT1(20) | N/A |
|
|
| 6 | Melemele | BIT4(23) | BIT3(22) | BIT2(21) | BIT1(20) | N/A |
|
| 7 | ʻōmaʻomaʻo | BIT5(24) | BIT4(23) | BIT3(22) | BIT2(21) | BIT1(20) | N/A |
| 8 | Poni | BIT6(25) | BIT5(24) | BIT4(23) | BIT3(22) | BIT2(21) | BIT1(20) |
| 9 | Hinahina | BIT7(26) | BIT6(25) | BIT5(24) | BIT4(23) | BIT3(22) | BIT2(21) |
| 10 | Keʻokeʻo | BIT8(27) | BIT7(26) | BIT6(25) | BIT5(24) | BIT4(23) | BIT3(22) |
| 11 | ʻEleʻele/Keʻokeʻo | BIT9(28) | BIT8(27) | BIT7(26) | BIT6(25) | BIT5(24) | BIT4(23) |
| 12 | ʻulaʻula/keʻokeʻo | BIT10(29) | BIT9(28) | BIT8(27) | BIT7(26) | BIT6(25) | BIT5(24) |
| 13 | Polū/Keʻokeʻo | Zero Reset | |||||
| Laina pale |
| GND |
|
|
|
| |
| Pin | kalakala | Olelo Hooholo | ||||||
| 2048 | 1024/720 | 512/360 | 256/180 | 128 | 64 |
| ||
| 1 | Polū | 0V | 0V |
|
|
|
|
|
| 2 | Palaunu | 8V-29V | 8V-29V |
|
|
|
|
|
| 3 | ʻeleʻele | BIT1(20) | BIT1(20) | N/A |
|
|
|
|
| 4 | ʻulaʻula | BIT2(21) | BIT2(21) | BIT1(20) | N/A |
|
|
|
| 5 | Alani | BIT3(22) | BIT3(22) | BIT2(21) | BIT1(20) | N/A |
|
|
| 6 | Melemele | BIT4(23) | BIT4(23) | BIT3(22) | BIT2(21) | BIT1(20) | N/A |
|
| 7 | ʻōmaʻomaʻo | BIT5(24) | BIT5(24) | BIT4(23) | BIT3(22) | BIT2(21) | BIT1(20) | N/A |
| 8 | Poni | BIT6(25) | BIT6(25) | BIT5(24) | BIT4(23) | BIT3(22) | BIT2(21) | BIT1(20) |
| 9 | Hinahina | BIT7(26) | BIT7(26) | BIT6(25) | BIT5(24) | BIT4(23) | BIT3(22) | BIT2(21) |
| 10 | Keʻokeʻo | BIT8(27) | BIT8(27) | BIT7(26) | BIT6(25) | BIT5(24) | BIT4(23) | BIT3(22) |
| 11 | ʻEleʻele/Keʻokeʻo | BIT9(28) | BIT9(28) | BIT8(27) | BIT7(26) | BIT6(25) | BIT5(24) | BIT4(23) |
| 12 | ʻulaʻula/keʻokeʻo | BIT10(29) | BIT10(29) | BIT9(28) | BIT8(27) | BIT7(26) | BIT6(25) | BIT5(24) |
| 13 | ʻAlani/Keʻokeʻo | BIT11(211) | N/A |
|
|
|
|
|
| Laina pale |
| GND |
|
|
|
|
| |
| Kakau kauoha |
| Anana |
Nānā:
▶ E hoʻopili ʻia ka pilina palupalu elastic ma waena o ka encoder shaft a me ke kumu hoʻopuka o ka hopena o ka mea hoʻohana e pale i ka pōʻino o ka ʻōnaehana shaft encoder ma muli o ka neʻe serial a holo i waho o ka lāʻau mea hoʻohana.
▶ E ʻoluʻolu e hoʻolohe i ka ukana axle i ʻae ʻia i ka wā e hoʻokomo ai.
▶ E hōʻoia i ka ʻokoʻa ma waena o Axial Degree o ka encoder shaft a me ka mea hoʻohana i ka mea hoʻohana ʻaʻole ʻoi aku ma mua o 0.20mm, a me ka deviation. ʻO ka huina me ke axis e emi ma lalo o 1.5 °.
▶ E hoʻāʻo e pale i ke kīkēkē ʻana a me ka hāʻule ʻana o ka hui ʻana i ka wā e hoʻokomo ai;
▶Mai hoʻohui i ka laina mana a me ka uwea honua ma hope.
▶E mānoanoa ka uea GND e like me ka hiki, ʻoi aku ka nui ma mua o φ 3.
▶ ʻAʻole e uhi ʻia nā laina hoʻopuka o ka encoder me kekahi i mea e pale aku ai i ka pōʻino o ke kaapuni puka.
▶ ʻAʻole e hoʻopili ʻia ka laina hōʻailona o ka encoder i ka lako mana DC a i ʻole AC i mea e pale aku ai i ka pōʻino puka.
▶ E hoʻopaʻa ʻia ka motika a me nā mea hana ʻē aʻe i pili i ka encoder me ka ʻole o ka uila.
▶E hoʻohana ʻia ke kaula pale no ka uwila.
▶ Ma mua o ka hoʻomaka ʻana i ka mīkini, e nānā pono inā pololei ke kelepona.
▶ I ka wā lōʻihi o ka hoʻouna ʻana, e noʻonoʻo ʻia ke kumu hōʻailona hōʻailona, a e koho ʻia ke ʻano hoʻopuka me ka impedance haʻahaʻa haʻahaʻa a me ka ikaika anti-interference.
▶ Hōʻalo i ka hoʻohana ʻana i ka hawewe electromagnetic ikaika.
ʻElima mau ʻanuʻu e hōʻike iā ʻoe pehea e koho ai i kāu encoder:
1. Inā ua hoʻohana mua ʻoe i nā encoders me nā hōʻailona ʻē aʻe, plz e ʻoluʻolu e hoʻouna iā mākou i ka ʻike o ka ʻike brand a me ka ʻike encoder, e like me ke kumu hoʻohālike, a me nā mea ʻē aʻe, e aʻo aku kā mākou ʻenekini iā ʻoe me kā mākou euqivalent pani ma kahi hana kiʻekiʻe;
2. Inā makemake ʻoe e ʻimi i ka encoder no kāu noi, plz koho mua i ke ʻano encoder: 1) Incremental encoder 2) Absolute encoder 3) Draw Wire Sensors 4) Manual Pluse Generator
3. E koho i kāu ʻano hoʻopuka (NPN/PNP/LINE DRIVER/PUSH PULL no incremental encoder) a i ʻole nā loulou (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. E koho i ka olelo hooholo o ka encoder, Max.50000ppr no Gertech incremental encoder, Max.29bits no Gertech Absolute Encoder;
5. E koho i ka Dia hale a me ka dia shaft. o ka encoder;
ʻO Gertech kahi mea hoʻololi like kaulana no nā huahana like ʻole e like me Sick/Heidenhain/Nemicon/Autonics/Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler, ETC.
Hoʻololi ʻo Gertech Equivalent:
ʻOmron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C; E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C; E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
Autonics: E30S, E40S, E40H, E50S, E50H, E60S, E60H Series
ʻIkepili Packaging
Hoʻopili ʻia ka encoder rotary i loko o ka pahu hoʻopuka maʻamau a i ʻole e like me ka mea e koi ʻia e nā mea kūʻai;
FAQ:
E pili ana i ka lawe ʻana:
Ka manawa alakaʻi: Hiki ke hoʻouna ʻia i loko o hoʻokahi pule ma hope o ka uku piha ʻana e DHL a i ʻole nā loiloi ʻē aʻe e like me ka noi;
E pili ana i ka uku:
Hiki ke uku ʻia ma o ka hoʻoili panakō, west union a me Paypal;
Mana maikaʻi:
ʻO ka pūʻulu hoʻonaʻauao maikaʻi ʻoihana a ʻike i alakaʻi ʻia e Mr. Hu, hiki ke hōʻoia i ka maikaʻi o kēlā me kēia huahana ke haʻalele ʻo ia i ka hale hana.Mr. ʻOi aku ʻo Hu ma mua o 10 mau makahiki i ka ʻoihana o nā encoders,
E pili ana i ke kākoʻo ʻenehana:
ʻO ka hui ʻenehana loea a ʻike i alakaʻi ʻia e Kauka Zhang, ua hoʻokō i nā hanana he nui i ka hoʻomohala ʻana i nā encoders, ma waho o nā encoders incremental maʻamau, ua hoʻopau ʻo Gertech iā Profinet, EtherCAT, Modbus-TCP a me Powe-rlink hoʻomohala;
palapala hōʻoia:
CE, ISO9001, Rohs a me KCaia ma ke kaʻina hana;
E pili ana i ka ninau:
E pane ʻia kēlā me kēia nīnau i loko o 24 mau hola, a hiki i ka mea kūʻai aku ke hoʻohui i ka app a i ʻole wechat no ka memo koke, e hāʻawi kā mākou hui kūʻai a me ka hui ʻenehana i ka lawelawe ʻoihana a me nā manaʻo;
Kulekele hōʻoia:
Hāʻawi ʻo Gertech i ka palapala hōʻoia 1 makahiki a me ke kākoʻo ʻenehana ola lōʻihi;
Aia mākou e kōkua. E pane koke kā mākou poʻe loea a me nā loea encoder i kāu mau nīnau encoder paʻakikī loa.
Expedite options are available on many models. Contact us for details:Terry_Marketing@gertechsensors.com;
