Usoro GSA-PL, Ntugharị Otu Ntugharị Ndekọ zuru oke
Usoro GSA-PL, Ntugharị Otu Ntugharị Ndekọ zuru oke
Ihe ngbanwe nke GSA-PL dị n'otu ntụgharị zuru oke dị mma maka ngwa ụlọ ọrụ dị iche iche na-achọ koodu ntinye nwere ikike nke nrụpụta ọnọdụ zuru oke. Teknụzụ mmepụta dijitalụ zuru oke na-eme ka ọ bụrụ nhọrọ magburu onwe ya maka ngwa niile, ọkachasị ndị nwere oke mkpọtụ. Dị na ma gburugburu servo ma ọ bụ square flange arịọnụ, na a dịgasị iche iche nke njikọ na cabling nhọrọ, GSA-PL Series na-adị mfe emebere n'ime a dịgasị iche iche nke ngwa chọrọ. Na nhọrọ ya sara mbara nke nha nha nke na-akwado ọkwa ụlọ ọrụ mmepụta ihe, NMB bearings, na nhọrọ IP67 akara ya, ọ dị mma maka gburugburu ebe obibi siri ike. Housing Dia.: 38,50,58mm; siri ike / oghere Shaft dayameta: 6,8,10mm; Mkpebi: Max.16bits Interface: Parallel; Koodu mmepụta: ọnụọgụ abụọ, isi awọ, oke isi awọ, BCD;
Asambodo: CE,ROHS,KC,ISO9001
Oge ndu:N'ime otu izu mgbe ịkwụ ụgwọ zuru ezu; Nnyefe site na DHL ma ọ bụ ndị ọzọ dị ka a tụlere;
▶ Ebe obibi:38,50,58mm;
▶ Ogologo ogwe osisi siri ike / oghere: 6,8,10mm;
▶Interface: Parallel;
▶ Mkpebi: Max.16bits;
▶ Voltage na-ebunye: 5v, 8-29v;
▶ Koodu mmepụta: ọnụọgụ abụọ, isi awọ, oke isi awọ, BCD;
▶ A na-eji ya n'ọtụtụ ebe dị iche iche nke njikwa akpaaka na sistemu nha, dị ka nrụpụta igwe, mbupu, textile, mbipụta, ụgbọ elu, ụlọ ọrụ agha igwe nyocha, igwe mbuli, wdg.
▶Vibration-eguzogide, corrosion-eguzogide, mmetọ-eguzogide;
Njirimara ngwaahịa | |||||
Ụlọ Dia.: | 58mm | ||||
Shaft siri ike: | 10mm | ||||
Data Eletriki | |||||
Mkpebi: | Max.16bits, Otu ntụgharị max.16bits, ngụkọta Max.29bits
| ||||
Ihuenyo: | Parallel/NPN/PNP onye na-anakọta oghe, Push pull, Line Driver; | ||||
Koodu mmepụta: | ọnụọgụ abụọ, isi awọ, oke isi awọ, BCD | ||||
Voltaji na-eweta: | 8-29V | ||||
Oke. Nzaghachi ugboro ugboro | 300Khz | ||||
Mepee mkpokọta | Mpụta voltaji | Onye ọkwọ ụgbọ ala | Pịa Pull | ||
Oriri ugbu a | ≤80mA; | ≤80mA; | ≤150mA; | ≤80mA; | |
Ibu ibu ugbu a | 40mA; | 40mA; | 60mA; | 40mA; | |
VOH | Min.Vcc x 70%; | Min.Vcc - 2.5v | Min.3.4v | Min.Vcc - 1.5v | |
VOL | Oke.0.4v | Oke.0.4v | Oke.0.4v | Oke.0.8v | |
MechanicalData | |||||
Malite Torque | 4 x10-3N•M | ||||
Oke. Nbudata Shaft | Axial: 29.4N, Radial:19,6N; | ||||
Oke. Ọsọ Rotary | 3000rpm | ||||
Ibu | 160-200 g | ||||
Data gburugburu | |||||
Okpomọkụ na-arụ ọrụ. | -30 ~ 80 ℃ | ||||
Okpomọkụ nchekwa. | -40 ~ 80 ℃ | ||||
Ọkwa nchekwa | IP54 |
Isi njikọ: |
Signal | Vcc | GND | D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 |
Agba | Agba aja aja | Ọcha | Uhie/acha anụnụ anụnụ | Agba ntụ/acha odo odo | Acha anụnụ anụnụ | Akwụkwọ ndụ akwụkwọ ndụ | Pink | Purple | Ọcha | Agba ntụ | Odo | Agba aja aja |
Koodu ịtụ |
Akụkụ |
Nzọụkwụ ise na-eme ka ị mara ka ị ga-esi họrọ koodu ntinye gị:
1.If ị na-ama na-eji encoders na ndị ọzọ ụdị, plz na-eche free iziga anyị ozi nke ika info na encoder info, dị ka nlereanya mba, wdg, anyị engineer ga-enye ndụmọdụ gị na anyị euqivalent nnọchi na a elu na-eri arụmọrụ;
2.Ọ bụrụ na ịchọrọ ịchọta koodu ntinye maka ngwa gị, plz buru ụzọ họrọ ụdị koodu ntinye: 1) ntinye ntinye 2) ihe mkpuchi zuru oke 3) Dọrọ Sensọ Wire 4) Manual Pluse Generator
3. Họrọ usoro mmepụta gị (NPN/PNP/LINE DRIVER/PUSH PULL for incremental encoder) ma ọ bụ interfaces (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Họrọ mkpebi nke encoder, Max.50000ppr maka Gertech incremental encoder, Max.29bits maka Gertech Absolute Encoder;
5. Họrọ ebe obibi Dia na shaft dia. nke koodu;
Gertech bụ onye nnọchi anya nha anya maka ngwaahịa si mba ọzọ dị ka Sick / Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.
Gertech Equivalent dochie:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C; E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C; E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
Autonics: E30S, E40S, E40H, E50S, E50H, E60S, E60H Series
Nkọwa nkwakọ ngwaahịa
A na-akwakọba ihe ngbanwe rotary na nkwakọ ngwaahịa mbupụ ọkọlọtọ ma ọ bụ dị ka ndị na-azụ ahịa chọrọ;
Ajụjụ:
1) Kedu otu esi ahọrọ koodu nzuzo?
Tupu ịtụ koodu koodu, ị nwere ike mara nke ọma ụdị koodu ị nwere ike ịchọ.
Enwere koodu ntinye agbakwunyere na koodu nzuzo zuru oke, mgbe nke a gasịrị, ngalaba ọrụ ire ahịa ga-abara gị uru.
2) Kedu nkọwapụta arịrịọsted tupu ịtụ koodu koodu?
Ụdị ihe nnochita—————-osisi siri ike ma ọ bụ ihe njiri oghere oghere
Dayameta Mpụga———-Nkeji 25mm, MAX 100mm
Oghere Oghere—————Ogwe Obere 4mm, Ogwe kacha 45mm
Usoro & Mkpebi———Nkeji 20ppr, MAX 65536ppr
Ọnọdụ mmepụta sekit --- ị nwere ike ịhọrọ NPN, PNP, Voltage, Push-pull, Line ọkwọ ụgbọ ala, wdg.
Voltaji na-enye ike——DC5V-30V
3) Otu esi ahọrọ koodu nzuzo ziri ezi site n'onwe gị?
Nkọwa nkọwa kpọmkwem
Lelee akụkụ nwụnye
Kpọtụrụ onye na-eweta ngwaahịa ka ị nweta nkọwa ndị ọzọ
4) Iberibe ole ka ịmalite?
MOQ bụ 20pcs. Obere obere dịkwa mma ma ibu dị elu.
5) Gịnị mere họrọ "Gertech” Ihe mkpuchi ika?
Ndị otu injinia nke anyị chepụtara ma mepụta koodu ntinye niile kemgbe afọ 2004, a na-ebubatakwa ọtụtụ akụrụngwa eletrọnịkị nke koodu n'ahịa si mba ofesi. Anyị nwere ụlọ ọrụ Anti-static na enweghị uzuzu na ngwaahịa anyị gafere ISO9001. Ekwela ka àgwà anyị daa, n'ihi na àgwà bụ omenala anyị.
6) Ogologo oge ole ka oge ndu gị dị?
Oge ụzọ dị mkpirikpi - ụbọchị 3 maka ihe nlele, ụbọchị 7-10 maka mmepụta oke
7) kedu ihe bụ amụma nkwa gị?
Akwụkwọ ikike 1 afọ na nkwado teknụzụ ogologo ndụ
8) Gịnị bụ uru ma ọ bụrụ na anyị na-aghọ gị gị n'ụlọnga?
Ọnụ ahịa pụrụ iche, nchebe ahịa na nkwado.
9) Kedu usoro iji bụrụ ụlọ ọrụ Gertech?
Biko zitere anyị ajụjụ, anyị ga-akpọtụrụ gị ozugbo enwere ike.
10) Gịnị bụ gị mmepụta ike?
Anyị na-emepụta 5000pcs kwa izu. Ugbu a, anyị na-ewu nke abụọ nkebi ahịrịokwu mmepụta li