Hua

GMA-M Series Modbus Bus-based Multi-Turn Absolute Encoder

Ko te encoder Rangatū GMA-M he maha nga hurihanga pahiModbusencoder tino, ka taea e ia te whakarato max 16bits waiata-trun taumira, ki te kōwhiringa o te whare Dia.:38,50,58mm; He Maamaa/Hollow Shaft Diameter:6,8,10mm, Waehere Putanga: Binary, Grey, Gray Excess, BCD; Ngaohiko Whakarato: 5v,8-29v; Ko te MODBUS he kawa tono/whakautu me te tuku ratonga kua tohua e nga waehere mahi. Ko nga waehere mahi MODBUS he huānga o te tono / whakautu PDU MODBUS. Ko te whainga o tenei tuhinga he whakamaarama i nga waehere mahi e whakamahia ana i roto i te anga o nga tauwhitinga MODBUS. Ko te MODBUS he kawa panui paparanga tono mo te whakawhitiwhiti korero a te kiritaki/tumau i waenga i nga taputapu e hono ana i runga i nga momo pahi rereke, i nga whatunga ranei.

Tiwhikete: CE,ROHS,KC,ISO9001

Wā ārahi:I roto i te wiki i muri i te utu katoa; Ko te tuku ma te DHL me etahi atu ranei i korerohia;

▶Tanenga Whare:38,50,58mm;

▶Soli/hollow Shaft Diameter:6,8,10mm;

▶Atanga: Modbus;

▶Whakatau: Max.16bits, Kotahi te huri max.16bits, Tapeke Max.29bits;

▶Ngaohiko Tukunga:5v,8-29v;

▶Waehere Huaputa: Arua, Kerei, Kerei Tawhetawhe, BCD;

▶Ka whakamahia nuitia i roto i nga momo waahi o te whakahaere aunoa me te punaha ine, penei i te hanga miihini, te kaipuke, te kakano, te ta, te rererangi, te umanga hoia Miihini whakamatautau, ararewa, aha atu.

▶Atete te wiri, te waikura, te parahanga;

Whakataki Matua

♦Atanga Whakawhiti:RS-485.Tāpiri：1～254.（Ko te taunoa ko 01）

♦Reiti Baud：4800,9600（Taunoa），19200,38400.Whakawhitiwhiti

♦Waenga：STP.

♦Hōputu Tāpare Rā：1 moka timata, 8 moka Raraunga, 1 moka Parity, 1 moka mutu, Rere kore-mana.

Hōputu Karere:

1.Kupu whakahau(CW) 03H：Pānuitia te Uara Tauwāhi

Tono Matua(MASTRQ):Wāhitau| Kupu Whakahau| Wāhitau Tawhā| Roa Raraunga | Taki Waehere

Whakautu taurekareka:Wāhitau| Kupu Whakahau| Paita Roa| Uara Tawhā| Taki Waehere

2.Kupu whakahau(CW) 10H：Tautuhi Uara Turanga O Naianei

Tono Matua(MASTRQ):Wāhitau| Kupu Whakahau| Wāhitau Tawhā| Roa Raraunga| Paita Roa| Uara Tawhā| Taki Waehere

Whakautu Taurekareka：Wāhitau| Kupu Whakahau| Wāhitau Tawhā| Roa Raraunga | Taki Waehere

3.Kupu whakahau(CW) 06H：Tuhia te Uara Tawhā

Tono Matua(MASTRQ):Wāhitau| Kupu Whakahau| Wāhitau Tawhā| Uara Tawhā| Taki Waehere

Whakautu Taurekareka：Wāhitau| Kupu Whakahau| Wāhitau Tawhā| Uara Tawhā | Taki Waehere

Pānui Wāhi Uara:

Uara Tauwāhi Uiui Matua:01H 03H 00H 00H 00H 02H C4H 0BH

Tuhipoka：01H-Wāhitau| 03H- Kupu Whakahau| 00H 00H-Rēhita Wāhitau| 0H 02H-Raraunga Roa（Wae: Kupu）| C4H 0BH- Tirohanga CRC

Whakautu Taurekareka: 01H 03H 04H 01H F4H 00H 01H 7BH FDH

Tuhipoka：01H-Wāhitau| 03H- Kupu Whakahau| 04H Roa Raraunga（Wae: Paita）| 01H F4H 00H 01H-Raraunga Tauwāhi | 7BH FDH- CRC Tirohanga

Tautuhinga Tawhā (Ka whai mana i muri i te hihiko ano):

Rau Tawhā:

Tuhipoka 1).Rēhita Wāhitau 0044H, Roa 0001H, Raraunga Paita Teitei Whakamaua hei 00H，Paita Iti hei Huri ID；

(2) Wāhitau Rēhita 0045H, Roa 0001H, Paita Teitei Raraunga Kua Utuhia hei 00H，Paita Iti hei Reiti Baud；

(3) Rēhita Wāhitau 0046H, Roa 0001H, Raraunga Paita Teitei Whakaritea kia 00H，Paita Iti ka Tatau Ahunga;

(4).Wāhitau Rēhita 004AH, Roa 0002H, E wha nga paita mai i Teitei ki te iti ka tatūkē onāianei Uara Wāhi (Tuhipoka kia kaua e hipa atu i te tepe tūnga tinana)；

Tauira Huri Tawhā:

a. Huri ID（01H ki 02H）：

Tukunga Matua:01H 06H 00H 44H 00H 02H 48H 1EH

Whakautu taurekareka:02H 06H 00H 44H 00H 02H 48H 2DH

Tuhipoka：01H-wāhitau | 06H-kupu whakahau | 00H 44H-Rigester Wāhitau | 00H 02H-Raraunga | 48H 1EH-CRC Taki(48H 2DH-CRC Taki)

b. Hurihia te Reiti Baud (te huringa BR ki te 04H-38400bps):

Tukunga Matua:01H 06H 00H 45H 00H 04H 99H DCH

Whakautu taurekareka:01H 06H 00H 45H 00H 04H 99H DCH

Tuhipoka：01H-Wāhitau|06H-Kupu Tono|00H 45H-Rēhita Wāhitau|00H 04H-Raraunga|99H DCH- CRC Taki

c． Huri Aronga Tatau (Ahanga Tatau 01H-Ate-a-karaka，Me Tautuhia te Uara Wāhi o Naianei I muri i te Huringa)

Tukunga Matua:01H 06H 00H 46H 00H 01H A9H DFH

Whakautu taurekareka:01H 06H 00H 46H 00H 01H A9H DFH

Tuhipoka：01H-wāhitau|06H-kupu whakahau|00H 46H-Rēhita Wāhitau|00H 01H-Raraunga|A9H DFH- CRC Taki

d. Tautuhi Uara Tūnga Onāianei(turanga o naianei Huri uara ki te 00000000H)

Tukunga Matua:01H 10H 00H 4AH 00H 02H 04H 00H 00H 00H 00H 77H E0H

Tuhipoka：01H-wāhitau|10H-kupu whakahau|00H 4AH-rehita wāhitau|00H 02H-raunga roa（Wae:Word）|04H-Raraunga Roa（Wae: Paita）|00H 00H 00H 00H-Raraunga|77H

B5H- Tirohanga CRC

Whakautu taurekareka:01H 10H 00H 4AH 00H 02H 60H 1EH

Tuhipoka：01H-wāhitau|10H-kupu whakahau|00H 4AH-rehita wāhitau|00H 02H-raunga roa（Waeine:Word）A0H DCH-CRC ChecL

E rima nga taahiraa e mohio ai koe me pehea te whiriwhiri i to encoder:
1.Mehemea kua whakamahia e koe nga encoders me etahi atu tohu, plz kia pai ki te tuku mai i nga korero mo te tohu tohu me nga korero encoder, penei i te tauira kore, me etahi atu, ka tohutohu to maatau miihini ki a koe me to maatau whakakapi euqivalent i te utu utu nui;
2.Mena kei te pirangi koe ki te kimi i tetahi encoder mo to tono, tohua tuatahi te momo encoder: 1) Incremental encoder 2) Absolute encoder 3) Draw Wire Sensors 4) Manual Pluse Generator
3. Whiriwhiria to whakatakotoranga putanga(NPN/PNP/LINE DRIVER/PUSH PULL mo te encoder incremental) me nga atanga (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Tīpakohia te taumira o te encoder, Max.50000ppr mo Gertech incremental encoder, Max.29bits mo Gertech Absolute Encoder;
5. Tīpakohia te Dia whare me te dia pou. o te encoder;
Ko Gertech he whakakapinga rite mo nga hua kee penei i a Sick/Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.

Whakakapi Gertech Ōrite:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C; E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C; E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Rangatū
Autonics: E30S, E40S, E40H,E50S, E50H, E60S, E60H Series

Nga Taipitopito mokete
Ko te encoder hurihuri kua kikii ki roto i nga kohinga kaweake paerewa, e hiahiatia ana ranei e nga kaihoko;

FAQ:
1) Me pehea te kowhiri i te encoder?
I mua i te tono i nga kaiwhakawaehere, ka tino mohio koe ko tehea momo encoder ka hiahia koe.
He encoder incremental me te encoder tino, i muri i tenei, ka pai ake to maatau tari hoko-mahi maau.
2) He aha nga whakaritenga requested i mua i te ota he whakawaehere?
Momo encoder—————-waa totoka, he kaitao hollow shaft ranei
Diamita o waho———-Min 25mm, MAX 100mm
Te Taone o te Rakau—————Min manga 4mm, Te nui o te rakau 45mm
Wāhanga me te Whakatau———Min 20ppr, MAX 65536ppr
Aratau Huaputa Arawhiti——-ka taea e koe te whiriwhiri NPN, PNP, Ngaohiko, Push-pull, Raina taraiwa, aha atu
Ngaohiko Whakawhiwhi Hiko——DC5V-30V
3) Me pehea koe ki te whiriwhiri i tetahi encoder tika?
Whakaahuatanga Whakatakotoranga Tika
Tirohia Nga Ahua o te Whakauru
Whakapa atu ki te Kaiwhakarato mo etahi atu korero
4) E hia nga wahanga hei timata?
Ko te MOQ ko 20pcs .He iti te rahinga he pai ano engari he nui ake te utu.
5) He aha te whiriwhiri "Gertech” Tohu Whakawaehere?
Ko nga kaiwhakawaehere katoa he mea hoahoa, he mea whakawhanakehia e ta maatau ake roopu miihini mai i te tau 2004, a ko te nuinga o nga waahanga hiko o nga kaiwhakawaehere he mea kawemai mai i te maakete o tawahi. No matou te awheawhe Anti-pateko me te kore-puehu me a matou hua ka paahitia te ISO9001. Kaua rawa e tuku i to tatou kounga ki raro, no te mea ko te kounga to tatou tikanga.
6) Kia pehea te roa o to wa arahi?
Te wa poto--3 ra mo nga tauira, 7-10days mo te hanga papatipu
7) he aha to kaupapa here taurangi?
1 tau te whakamana me te tautoko hangarau mo te wa roa
8) He aha nga painga ki te riro matou hei tiwhiringa maau?
Utu motuhake, Tiaki maakete me te tautoko.
9)He aha te tikanga kia noho hei umanga Gertech?
Tena koa tukuna mai he patai, ka whakapa atu matou ki a koe i te wa e taea ai.
10) He aha to kaha whakaputa?
Ka whakaputahia e matou nga 5000pcs i ia wiki.Na kei te hanga matou i te rarangi whakaputa rerenga tuarua.