GMA-S Series SSI Atanga Maha-Tahuri Whakawaehere Tino
GMA-S Series SSI Atanga Maha-Tahuri Whakawaehere Tino
GMA-S Series tino encoder he SSI multiturn tino encoder. Ko te Atanga Rangatū Tukutahi (SSI) he tohu-ki-ira kia kore e taea te pahi tahi nga pononga. Ko te SSI he huarahi kotahi, ko te tuku raraunga mai i te pononga ki te rangatira. Na reira kaore e taea e te rangatira te tuku raraunga whirihoranga ki tetahi taurekareka. Ko nga tere whakawhitiwhiti he iti ki te 2 Mbits / sec.He maha nga taputapu SSI e whakatinana ana i nga whakawhitinga rua hei whakapai ake i te pono o te korero. Ka whakatauritehia e te rangatira nga whakawhitinga kia kitea nga hapa. Ko te arowhai parerite (Apitihanga) ka whakapai ake i te kitenga hapa. Ko te SSI he paerewa ahua wetekina me te maha o nga putanga kua whakarereketia tae atu ki te whiringa mo te atanga AqB, hara/cos ranei. I roto i tenei whakatinanatanga ka panuihia te tuunga tuturu i te tiimatanga. Housing Dia.:38,50,58mm; Maoti/hollow Shaft Diameter:6,8,10mm; Resolution: Kotahi huri max.16bits; Atanga:SSI; Waehere Putanga: Binary, Grey, Gray Excess, BCD; Ngaohiko Whakarato: 5v,8-29v;
Tiwhikete: CE,ROHS,KC,ISO9001
Wā ārahi:I roto i te wiki i muri i te utu katoa; Ko te tuku ma te DHL me etahi atu ranei i korerohia;
▶Tanenga Whare:38,50,58mm;
▶Soli/hollow Shaft Diameter:6,8,10mm;
▶Atanga: SSI;
▶Tauinga: Max.16bits, Takitahi max.16bits, Tapeke Max.29bits
▶Ngaohiko Tukunga:5v,8-29v;
▶Waehere Huaputa: Arua, Kerei, Kerei Tawhetawhe, BCD;
▶Ka whakamahia nuitia i roto i nga momo waahi o te whakahaere aunoa me te punaha ine, penei i te hanga miihini, te kaipuke, te kakano, te ta, te rererangi, te umanga hoia Miihini whakamatautau, ararewa, aha atu.
▶Atete te wiri, te waikura, te parahanga;
| Nga ahuatanga hua | ||||||
| Whare Whare.: | 58mm | |||||
| Te Taa o te Poro Totoi.: | 10mm | |||||
| Raraunga Hiko | ||||||
| Whakatau: | Max.16bits, Kotahi huri max.16bits, Tapeke Max.29bits | |||||
| Atanga: | SSI/NPN/PNP kaikohi tuwhera, Push pull, Raina Atekōkiri; | |||||
| Waehere Huaputa: | Binary, Grey, Grey Excess, BCD | |||||
| Ngaohiko Tukunga: | 8-29V | |||||
| Max. Whakautu Auautanga | 33Khz~4Mhz | |||||
| Tūemi | Min | Max | ||||
| Waitohu Whakauru | Karaka | Ngaohiko | VIH | 2.1v | Vcc | |
| VIL | 0.9v | |||||
| Waitohu Huaputa | Raraunga | Ngaohiko | VOH | 2.0v | Vcc | |
| VOL | 0.5v | |||||
| o nāianei | IO | 15mA | ||||
| HangaiaRaraunga | ||||||
| Tīmata Torque | 4 x 10-3N•M | |||||
| Max. Te Uta i te Shaft | Axial: 5-30N, Radial: 10-20N; | |||||
| Max. Tere Rotary | 5000rpm | |||||
| Taumaha | 160-200g | |||||
| Raraunga Taiao | ||||||
| Temp Mahi. | -30~80 ℃ | |||||
| Rokiroki Temp. | -40~80 ℃ | |||||
| Koeke Tiaki | IP54 | |||||
| Hononga Arahi: | |||||||||||||||
| Waitohu | Vcc | GND | Karaka+ | Karaka- | Raraunga+ | Raraunga- | Kore | ||||||||
| Tae | Paraone | Kahurangi | Mā | Kerei | Pango | Waiporoporo | Kōwhai | ||||||||
| Atanga | |||||||||||||||
| Tawhā | Tohu | Min. | Pato. | Max. | Waeine | Tuhipoka | |||||||||
| Wā Karaka | tCL | 0.25 | 2 xtM | μs | |||||||||||
| Karaka Teitei | tCHL | 0.1 | tM | μs | |||||||||||
| Karaka Haka | tCLO | 0.1 | tM | μs | |||||||||||
| Te wa Monoflop | tM | 15 | 19 | 25 | μs | ||||||||||
Tauira Putanga:
1)Tauira Whakaputa Raraunga Kotahi
Panui noa
Panui Panui
2)Tauira Putanga Raraunga Tonu
| Waehere Whakatau |
| Ahu |
Tuhipoka:
▶Ka whakamahia he hononga ngohengohe rapa i waenga i te rakau encoder me te rakau whakaputa o te mutunga o te kaiwhakamahi kia kore ai e pakaru te punaha toka encoder na te nekehanga rangatū me te rere atu i te rakau kaiwhakamahi.
▶ Tena koa whakarongo ki te kawenga toki e whakaaetia ana i te wa e whakauruhia ana.
▶ Kia mohio ko te rereketanga i waenga i te Axial Degree o te encoder shaft me te kaiwhakamahi kare e neke ake i te 0.20mm, me te rereke. Ko te koki me te tuaka kia iti iho i te 1.5 °.
▶ Ngana ki te karo i te patoto me te hinga i te tukinga i te wa o te whakaurunga;
▶Kaua e honoa te aho hiko me te waea whenua ki te whakamuri.
▶Ko te waea GND kia rite ki te matotoru, he nui ake i te φ 3.
▶Ko nga raina whakaputa o te encoder kaua e whiti tetahi ki tetahi kia kore ai e pakaru te ara iahiko whakaputa.
▶Ko te raina tohu o te encoder kaua e hono ki te hiko DC, te hiko AC ranei kia kore ai e pakaru te ara iahiko whakaputa.
▶Ko te motini me etahi atu taputapu e hono ana ki te encoder kia pai te whenua kaore he hiko hiko.
▶Ka whakamahia te taura whakamarumaru mo te waea.
▶I mua i te tiimata o te miihini, tirohia kia tika te waea.
▶ I te wa o te tuku tawhiti, ka whakaarohia te tohu whakahekenga tohu, ka tohua te aratau whakaputa me te iti o te aukati whakaputa me te kaha ki te aukati i te aukati.
▶A ape i te whakamahi i roto i te taiao ngaru hiko hiko.
E rima nga taahiraa e mohio ai koe me pehea te whiriwhiri i to encoder:
1.Mehemea kua whakamahia e koe nga encoders me etahi atu tohu, plz kia pai ki te tuku mai i nga korero mo te tohu tohu me nga korero encoder, penei i te tauira kore, me etahi atu, ka tohutohu to maatau miihini ki a koe me to maatau whakakapi euqivalent i te utu utu nui;
2.Mena kei te pirangi koe ki te kimi i tetahi encoder mo to tono, tohua tuatahi te momo encoder: 1) Incremental encoder 2) Absolute encoder 3) Draw Wire Sensors 4) Manual Pluse Generator
3. Whiriwhiria to whakatakotoranga putanga(NPN/PNP/LINE DRIVER/PUSH PULL mo te encoder incremental) me nga atanga (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Tīpakohia te taumira o te encoder, Max.50000ppr mo Gertech incremental encoder, Max.29bits mo Gertech Absolute Encoder;
5. Tīpakohia te Dia whare me te dia pou. o te encoder;
Ko Gertech he whakakapinga rite mo nga hua kee penei i a Sick/Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.
Whakakapi Gertech Ōrite:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C; E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C; E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Rangatū
Autonics: E30S, E40S, E40H,E50S, E50H, E60S, E60H Series
Nga Taipitopito mokete
Ko te encoder hurihuri kua kikii ki roto i nga kohinga kaweake paerewa, e hiahiatia ana ranei e nga kaihoko;
E rima nga taahiraa e mohio ai koe me pehea te whiriwhiri i to encoder:
1.Mehemea kua whakamahia e koe nga encoders me etahi atu tohu, plz kia pai ki te tuku mai i nga korero mo te tohu tohu me nga korero encoder, penei i te tauira kore, me etahi atu, ka tohutohu to maatau miihini ki a koe me to maatau whakakapi euqivalent i te utu utu nui;
2.Mena kei te pirangi koe ki te kimi i tetahi encoder mo to tono, tohua tuatahi te momo encoder: 1) Incremental encoder 2) Absolute encoder 3) Draw Wire Sensors 4) Manual Pluse Generator
3. Whiriwhiria to whakatakotoranga putanga(NPN/PNP/LINE DRIVER/PUSH PULL mo te encoder incremental) me nga atanga (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Tīpakohia te taumira o te encoder, Max.50000ppr mo Gertech incremental encoder, Max.29bits mo Gertech Absolute Encoder;
5. Tīpakohia te Dia whare me te dia pou. o te encoder;
Ko Gertech he whakakapinga rite mo nga hua kee penei i a Sick/Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.
Whakakapi Gertech Ōrite:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C; E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C; E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Rangatū
Autonics: E30S, E40S, E40H,E50S, E50H, E60S, E60H Series
Nga Taipitopito mokete
Ko te encoder hurihuri kua kikii ki roto i nga kohinga kaweake paerewa, e hiahiatia ana ranei e nga kaihoko;
FAQ:
1) Me pehea te kowhiri i te encoder?
I mua i te tono i nga kaiwhakawaehere, ka tino mohio koe ko tehea momo encoder ka hiahia koe.
He encoder incremental me te encoder tino, i muri i tenei, ka pai ake to maatau tari hoko-mahi maau.
2) He aha nga whakaritenga requested i mua i te ota he whakawaehere?
Momo encoder—————-waa totoka, he kaitao hollow shaft ranei
Diamita o waho———-Min 25mm, MAX 100mm
Te Taone o te Rakau—————Min manga 4mm, Te nui o te rakau 45mm
Wāhanga me te Whakatau———Min 20ppr, MAX 65536ppr
Aratau Huaputa Arawhiti——-ka taea e koe te whiriwhiri NPN, PNP, Ngaohiko, Push-pull, Raina taraiwa, aha atu
Ngaohiko Whakawhiwhi Hiko——DC5V-30V
3) Me pehea koe ki te whiriwhiri i tetahi encoder tika?
Whakaahuatanga Whakatakotoranga Tika
Tirohia Nga Ahua o te Whakauru
Whakapa atu ki te Kaiwhakarato mo etahi atu korero
4) E hia nga wahanga hei timata?
Ko te MOQ ko 20pcs .He iti te rahinga he pai ano engari he nui ake te utu.
5) He aha te whiriwhiri "Gertech” Tohu Whakawaehere?
Ko nga kaiwhakawaehere katoa he mea hoahoa, he mea whakawhanakehia e ta maatau ake roopu miihini mai i te tau 2004, a ko te nuinga o nga waahanga hiko o nga kaiwhakawaehere he mea kawemai mai i te maakete o tawahi. No matou te awheawhe Anti-pateko me te kore-puehu me a matou hua ka paahitia te ISO9001. Kaua rawa e tuku i to tatou kounga ki raro, no te mea ko te kounga to tatou tikanga.
6) Kia pehea te roa o to wa arahi?
Te wa poto--3 ra mo nga tauira, 7-10days mo te hanga papatipu
7) he aha to kaupapa here taurangi?
1 tau te whakamana me te tautoko hangarau mo te wa roa
8) He aha nga painga ki te riro matou hei tiwhiringa maau?
Utu motuhake, Tiaki maakete me te tautoko.
9)He aha te tikanga kia noho hei umanga Gertech?
Tena koa tukuna mai he patai, ka whakapa atu matou ki a koe i te wa e taea ai.
10) He aha to kaha whakaputa?
Ka whakaputahia e matou nga 5000pcs i ia wiki.Na kei te hanga matou i te rarangi whakaputa rerenga tuarua.
