GMA-PN Series Profinet Interface Ethernet Multi-turn Absolute Encoder
GMA-PN Series encoder ke Profinet interface gear-type multi-turn absolute encoder e nang le matlo Dia.:58mm; Shaft e tiileng Dia.: 10mm; Qeto: Multi-turn Max.29bits; Supply Voltage:5v,8-29v, PROFINET ke mokhoa oa puisano oa ho iketsetsa oaPROFIBUS & PROFINET International (PI).Har'a likarolo tsa eona tse 'maloa, likarolo tse latelang li tiisa ts'ebeliso ea PROFINET:
Flexible Network Topology
PROFINET ke 100% Ethernet e tsamaellanang ho latela maemo a IEEE 'me e ikamahanya le maemo a semela se seng se le teng ka lebaka la mohala oa eona o feto-fetohang, selikalikoe, le libopeho tsa linaleli le litharollo tsa thapo tsa koporo le fiber-optic. Tlhahlobo e Kopanetsoeng
PROFINET e kenyelletsa mehopolo e bohlale ea tlhahlobo ea lisebelisoa tsa tšimo le marang-rang. Acyclic diagnostic data transmission e fana ka tlhahisoleseding ea bohlokoa mabapi le boemo ba lisebelisoa le marang-rang, ho kenyelletsa le pontšo ea topology ea marang-rang. Ho fumaneha ho Phahameng
PROFINET e kenyelletsa tharollo ea bofokoli ba boits'oaro ka bo eona. Scalable Real Nako
Puisano e etsahala ka thapo e le 'ngoe lits'ebetsong tsohle, ho tloha mesebetsing e bonolo ea taolo ho isa lits'ebetsong tsa taolo e boima haholo. Bakeng sa ts'ebetso e nepahetseng e phahameng ea taolo e koetsoeng, phetisetso ea deterministic le isochronous ea data ea bohlokoa ea nako e nang le jitter e ka tlase ho 1 μs e ka khoneha. data e nang le jitter e ka tlase ho 1 μs e ka khoneha. Mehaho e Atolositsoeng ea Sistimi
Ntle le sebopeho se tloaelehileng sa othomathike se nang le molaoli le lisebelisoa tsa sona tsa masimong, meaho ea maemo a holimo e nang le lisebelisoa tse bohlale tsa masimo le tšebeliso e arolelanoang ea lisebelisoa tsa masimong le li-module tsa ho kenya ke balaoli ba bangata le tsona li ka phethahala. Theknoloji ea PROFINET
PROFINET ke mokhoa o tloaelehileng oa Industrial Ethernet o kopanyang semela le lisebelisoa tse ling tsa IT tsa khoebo. E fana ka ts'ebetso e ts'oanang le PROFIBUS. Litekanyetso tsa IT tse thehiloeng li sebelisoa e le motheo oa puisano: TCP, UDP, le IP. XML e sebelisoa e le puo ea tlhaloso bakeng sa lintlha tsa lisebelisoa (lifaele tsa GSDML). Mekhoa e 'meli ea ho sebelisa PROFINET e teng: PROFINET IO, e tšoanang le PROFIBUS DP e le tsamaiso ea I/O e ajoang le PROFINET CBA e le mokhoa oa modular component bakeng sa litsamaiso tse kholoanyane.
- PROFINET e fana ka puisano e mpe bakeng sa lits'ebetso tse fapaneng ho li-automation tsa indasteri:
- PROFINET NRT (nako eo e seng ea sebele) e loketse mokhoa oa boiketsetso o sa hlokeng nako ea bohlokoa ka litekanyetso tsa oache tse ka bang 100 msec.
- PROFINET RT (nako ea sebele) e fana ka mocha oa puisano o nang le ts'ebetso e ntlafalitsoeng (10 msec clock rate) bakeng sa mesebetsi e mengata ea lifeme.
- PROFINET IRT (nako ea sebele ea isochronous) e sebelisa lisebelisoa tse khethehileng tsa puisano ho nolofalletsa litekanyetso tsa oache tse ka tlase ho 1 msec le ho nepahala ha jitter ho ka tlase ho 1 μsec. Kanane ena e sebelisoa haholo bakeng sa lits'ebetso tsa taolo ea motsamao.
PROFINET IO e sebelisa pono ea I/O e ajoang e tšoanang le PROFIBUS DP. Balaoli ba IO (mohlala, PLCs) ba tsamaisa lenaneo la ho iketsetsa, lisebelisoa tsa IO (mohlala, li-encoder tse felletseng) ke lisebelisoa tsa tšimo tse abetsoeng u le hole, 'me baokameli ba IO (mohlala, lisebelisoa tsa mananeo) ba sebelisoa bakeng sa ts'ebetso le tlhahlobo. Boenjiniere ba PROFINET IO bo etsoa joalo ka PROFIBUS. Libese tsa masimo (ke hore Ethernet topology) li abeloa ho laola litsamaiso nakong ea tlhophiso. Sesebelisoa sa IO se hlophisitsoe ho sistimi ea 'nete ho ipapisitse le litaba tsa faele ea eona ea GSDML. Ka mor'a ho phethoa ha boenjiniere, mochine o kenya data bakeng sa katoloso ho molaoli oa IO (PLC) 'me molaoli oa IO o nka phapanyetsano ea data le sesebelisoa sa IO.
Sesebelisoa sa IO se rarolloa ka har'a PROFINET ('me hape mohlomong le likarolo tsa IT tsa kantle) ka aterese ea eona ea IP. Lintlha li ka fapanyetsanoa ho tloha ho molaoli oa IO ho ea ho sesebelisoa sa IO (le ka tsela e fapaneng) ka lebelo (bakeng sa data ea ts'ebetso). Ntle le sena, data ea parameter e ka fapanyetsanoa ka mokhoa oa acyclically nakong ea boenjiniere ba sesebelisoa sa IO kapa ka tšebeliso ea li-block tsa PLC.
Setifikeiti: CE, ROHS, KC, ISO9001
Nako ea ho etella pele:Nakong ea beke ka mor'a tefo e feletseng; Ho tsamaisoa ke DHL kapa tse ling joalo ka ha ho boletsoe;
▶Bokahare ba Matlo: 58mm;
▶Bokahare ba Shaft e tiileng / e sekoti: 10mm;
▶Sephetho:Proe ntle;
▶ Qeto: Multi-turn Max.12bits e reteleha, Single Turn Max.13bits;
▶Supply Voltage: 5v,8-29v;
▶ E sebelisoa haholo mafapheng a fapaneng a taolo ea boiketsetso le mokhoa oa ho metha, joalo ka ho etsa mechini, ho tsamaisa thepa, masela, khatiso, lifofane, mochini oa liteko oa indasteri ea sesole, lifti, jj.
▶Ha e thothomele, e hana ho bola, e thibela tšilafalo;
Litšobotsi tsa sehlahisoa |
Dia ya Matlo.: | 58 limilimithara |
Solid Shaft Dia.: | 10 limilimithara |
Lintlha tsa Motlakase |
Qeto: | Max.16bits, Single turn max.16bits, Total Max.29bits |
Sehokelo: | Profinet |
Phepelo ea Voltage: | 8-29V |
Max. Karabelo ea Khafetsa | 30Khz |
MechiniLintlha |
Qala Torque | 0.01N•M |
Max. Shaft Loading | Axial: 5-30N, Radial: 10-20N; |
Max. Lebelo la Rotary | 6000rpm |
Boima ba 'mele | 160-200 g |
Lintlha tsa Tikoloho |
Mocheso o sebetsang. | -30 ~ 80 ℃ |
Mocheso oa polokelo. | -40 ~ 80 ℃ |
Mophato wa Tshireletso | IP65 |
Mehato e mehlano e tla u tsebisa mokhoa oa ho khetha encoder ea hau:
1.Haeba u se u sebelisitse li-encoder tse nang le mefuta e meng, plz ikutloe u lokolohile ho re romella lintlha tsa lintlha tsa mofuta le lintlha tsa encoder, joalo ka mohlala no, joalo-joalo, moenjiniere oa rona o tla u eletsa ka phetisetso ea rona e theko e phahameng haholo;
2.Haeba u batla ho fumana sekhoudara sesebelisoa sa hau, plz khetha pele mofuta oa encoder: 1) Encoder e eketsang 2) Encoder e felletseng 3) Draw Wire Sensors 4) Manual Pluse Jenereithara.
3. Khetha sebopeho sa hau sa tlhahiso (NPN/PNP/LINE DRIVER/PUSH PULL bakeng sa encoder e eketsehileng) kapa li-interfaces (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Khetha qeto ea encoder, Max.50000ppr bakeng sa Gertech incremental encoder, Max.29bits bakeng sa Gertech Absolute Encoder;
5. Khetha ea matlo Dia le shaft dia. ea encoder;
Gertech ke phetisetso e tšoanang e tsebahalang ea lihlahisoa tse tšoanang tsa kantle ho naha joalo ka Sick/Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.
Gertech Equivalent nkela sebaka:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C; E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C; E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
Autonics: E30S, E40S, E40H,E50S, E50H, E60S, E60H Series
Lintlha tsa Sephutheloana
Rotary encoder e kentsoe ka har'a sephutheloana se tloaelehileng sa kantle ho naha kapa joalo ka ha ho hlokoa ke bareki;
LBH:
1) U ka khetha encoder joang?
Pele o odara li-encoder, o ka tseba ka ho hlaka hore na o hloka mofuta ofe oa encoder.
Ho na le li-encoder tse ntseng li eketseha le li-encoder tse felletseng, kamora sena, lefapha la rona la litšebeletso tsa thekiso le ka u sebeletsa hamolemo.
2) Litlhaloso ke life requested pele o laela encoder?
Mofuta oa encoder——————-solid shaft kapa hollow shaft encoder
Bophara ba ka Ntle———-Min 25mm, MAX 100mm
Shaft Diameter—————Min shaft 4mm, Max shaft 45mm
Mohato le Qeto———Min 20ppr, MAX 65536ppr
Circuit Output Mode——-o ka khetha NPN, PNP, Voltage, Push-pull, Line driver, jj.
Matla a Phepelo ea Matla——DC5V-30V
3) U ka khetha encoder e nepahetseng joang u le mong?
Hantle-ntle Tlhaloso
Sheba The Installation Dimensions
Ikopanye le Supplier ho fumana lintlha tse ling
4) Ho qala likotoana tse kae?
MOQ ke 20pcs .Boemo bo fokolang bo boetse bo lokile empa thepa e phahame.
5) Hobaneng u khetha "Gertech” Brand Encoder?
Li-encoder tsohle li entsoe le ho ntlafatsoa ke sehlopha sa rona sa boenjiniere ho tloha ka selemo sa 2004, 'me boholo ba likarolo tsa elektroniki tsa li-encoder li romelloa kantle ho naha ho tsoa 'marakeng oa mose ho maoatle. Re na le workshop ea Anti-static le e se nang lerōle mme lihlahisoa tsa rona li fetisa ISO9001. Le ka mohla u se ke ua theola boleng ba rona, hobane boleng ke moetlo oa rona.
6) Nako ea hau ea ho etella pele e telele hakae?
Nako e khutšoanyane ea ho etella pele - matsatsi a 3 bakeng sa lisampole, matsatsi a 7-10 bakeng sa tlhahiso ea bongata
7) leano la hau la tiisetso ke eng?
Tiisetso ea selemo sa 1 le ts'ehetso ea tekheniki ea bophelo bohle
8) Melemo ke efe ha re ka ba setsi sa hau?
Litheko tse khethehileng, tšireletso ea 'maraka le tšehetso.
9) Mokhoa oa ho ba setsi sa Gertech ke ofe?
Ka kopo re romelle potso, re tla ikopanya le uena kapele kamoo ho ka khonehang.
10) Bokhoni ba hau ba tlhahiso ke bofe?
Re hlahisa 5000pcs beke le beke. Hona joale re ntse re haha mohala oa tlhahiso ea poleloana ea bobeli.
E fetileng: GMA-D Series DeviceNet Interface Bus-Based Multi-turn Absolute Encoder E 'ngoe: GMA-EC Series EtherCAT Interface Ethernet Multi-Turn Absolute Encoder