• sns03
  • sns04
  • sns01
Pe Wa: 0086 19910325996
English
ori_oju_bg

Awọn ọja

  • GI-D315 Jara 0-10000mm Iwọn Iwọn Iyaworan Wire Encoder

    GI-D315 Jara 0-10000mm Iwọn Iwọn Dra...

    GI-D315 Jara kooduopo jẹ iwọn wiwọn 0-10000mm iwọn wiwọn ga sensọ okun waya. O pese awọn abajade to dara julọ:Analog-0-10v, 4 20mA;Ilọsiwaju: NPN/PNP olugba ṣiṣi silẹ, Titari fa, Awakọ Laini;Ni pipe: Biss, SSI, Modbus, CANopen, Profibus-DP, Profinet, EtherCAT, Parallel bbl Wire Rope Dia.: 0.6mm, Linear Tolerance: ± 0.1%, Ile aluminiomu n pese sensọ ti o gbẹkẹle fun awọn agbegbe ile-iṣẹ. Jije mejeeji ti ọrọ-aje ati iwapọ, iwọnyi ni o yẹ fun ọpọlọpọ awọn ohun elo.D315 Series pese awọn iwọn kongẹ lalailopinpin nitori iṣedede inherent ti awọn encoders (mejeeji awọn encoders pipe ati ti afikun) ati ikole gaungaun ni idaniloju iṣẹ ṣiṣe ti o gbẹkẹle paapaa labẹ awọn ipo to gaju. Awọn wiwọn jẹ deede gaan, igbẹkẹle ati awọn eto ni awọn igbesi aye gigun pupọ laisi sisọnu awọn abuda atorunwa rẹ.

     

     

    ibeereapejuwe awọn
  • GS-SVZ35 Series Servo Motor Encoder

    GS-SVZ35 Series Servo Motor Encoder

    Lilo ti inu ti awọn ẹrọ ASIC, igbẹkẹle giga, igbesi aye gigun, kikọlu ti o lagbara.A ṣe apẹrẹ ọpa taper lati rọrun lati rọra, pẹlu iwọn didun fifi sori ẹrọ kekere, ibiti o ga julọ, ko nilo ilana ifihan agbara, pẹlu ABZUVW ifihan agbara ikanni mẹfa, eyi ti o le wa ni ti sopọ pẹlu boṣewa ila wakọ (26LS31) RS422, le pese 12 o wu awọn ifihan agbara, ni ibamu pẹlu TTL;
    ibeereapejuwe awọn
  • GE-A Series Sine/ Cosine o wu awọn ifihan agbara jia Iru kooduopo

    GE-A Series Sine/ Awọn ifihan agbara Ijade Cosine Jia Ty...

    Awọn koodu koodu GE-A Gear jẹ awọn koodu afikun ti kii ṣe olubasọrọ fun iyara iyipo ati wiwọn ipo. Da lori imọ-ẹrọ sensọ Tunneling Magnetoresitance (TMR) alailẹgbẹ ti Gertech, wọn pese awọn ifihan agbara iyatọ ẹṣẹ orthogonal pẹlu didara giga, pẹlu ifihan itọka ati awọn ifihan agbara onidakeji wọn. Awọn GE-A jara ti wa ni apẹrẹ fun 0.3 ~ 1.0-module murasilẹ pẹlu o yatọ si eyin awọn nọmba.

    ibeereapejuwe awọn
  • GI-H90 Series 90mm Housing Hollow Shaft Incremental Encoder

    GI-H90 Series 90mm Hollow Shaft Increame...

    GI-H90 Jara Nipasẹ ṣofo ọpa fifi koodu ti a ṣe apẹrẹ lati baamu taara lori boya motor tabi ọpa miiran nibiti ipo, itọsọna, tabi alaye iyara ti nilo. Ẹrọ itanna orisun Opto-ASIC ti ilọsiwaju pese ajesara ariwo ti o ga julọ pataki ni ọpọlọpọ awọn ohun elo ile-iṣẹ. H90 Series ni irọrun ṣe ẹya iru idimole kan fun gbigbe ni iyara ati irọrun lori titobi nla ti awọn iwọn ọpa. Ohun iyan egboogi-yiyi flex òke ntẹnumọ ile iduroṣinṣin.

     

     

    ibeereapejuwe awọn
  • GI-D15 Jara 0-500mm Idiwọn Ibiti Fa Waya Encoder

    GI-D15 Jara 0-500mm Iwọn Iwọn Iyara Wi...

    GI-D15 Series encoder ni a 0-500mm wiwọn ibiti o fa waya sensọ.Its mini iwọn jẹ apẹrẹ fun julọ ṣiṣẹ aaye. D15 Series Draw Waya ni ibamu pẹlu bulti-in afọwọṣe sensọ ti 0-10v, 4-20mA ati 0-10k awọn abajade, smati deede ati irọrun fun ọpọlọpọ awọn ohun elo;

     

     

    ibeereapejuwe awọn
  • GSA-A Series Nikan-Tan Analog Absolute Rotari Encoder

    GSA-A Series Nikan-Tan Analog Idi Rotari...

    GSA-A Series Single-Turn Analog Absolute Rotary Encoder jẹ apẹrẹ fun ọpọlọpọ awọn ohun elo ile-iṣẹ ti o nilo iṣelọpọ ipo pipe. Imọ-ẹrọ iṣelọpọ oni-nọmba rẹ ni kikun jẹ ki o jẹ yiyan ti o dara julọ fun gbogbo awọn ohun elo, paapaa awọn ti o ni wiwa giga ti ariwo.Eyi koodu pese awọn aṣayan 3 ti iṣelọpọ0-10v, 4-20mA, 0-10kWa pẹlu boya servo yika tabi iṣagbesori flange square, ati ọpọlọpọ awọn asopo ati awọn aṣayan cabling, GSA-A Series jẹ irọrun apẹrẹ sinu ọpọlọpọ awọn ibeere ohun elo. Pẹlu awọn oniwe-jakejado asayan ti ọpa titobi ni atilẹyin nipasẹ ise ite, NMB bearings, ati awọn oniwe-iyan IP67 asiwaju, o jẹ apẹrẹ fun alakikanju agbegbe.Housing Dia.: 38,50,58mm; Ri to / Afọju ṣofo Apa Iwọn Iwọn: 6,8,10mm; Ipinnu: Max.8192ppr;

     

    ibeereapejuwe awọn
  • GMA-PL Series Parallel Multiturn Absolute Encoder

    GMA-PL Series Parallel Multiturn Absolute Encoder

    GMA-PL Series parallel Multi turn absolute encoder jẹ apẹrẹ fun ọpọlọpọ awọn ohun elo ile-iṣẹ ti o nilo kooduopo pẹlu agbara ti iṣelọpọ ipo pipe. Imọ-ẹrọ iṣelọpọ oni nọmba ni kikun jẹ ki o jẹ yiyan ti o dara julọ fun gbogbo awọn ohun elo, ni pataki awọn ti o ni wiwa giga ti ariwo. Wa pẹlu boya servo yika tabi iṣagbesori flange square, ati ọpọlọpọ awọn asopo ati awọn aṣayan cabling, GSA-PL Series jẹ irọrun apẹrẹ sinu ọpọlọpọ awọn ibeere ohun elo. Pẹlu awọn oniwe-jakejado asayan ti ọpa titobi ni atilẹyin nipasẹ ise ite, NMB bearings, ati awọn oniwe-ipin IP67 asiwaju, o jẹ apẹrẹ fun alakikanju agbegbe.Housing Dia.: 38,50,58mm;Solid / hollow Shaft Dimeter: 6,8,10mm; Ipinnu: Max.29bits Interface: Parallel; Koodu Ijade: Alakomeji, Grẹy, Grey Excess, BCD;

     

    ibeereapejuwe awọn
  • GI-H80 Series 80mm Housing ṣofo ọpa Incremental Encoder

    GI-H80 Series 80mm Housing Hollow Shaft Increme...

    GI-H80 Jara nipasẹ fifi koodu ṣofo ṣofo pẹlu ọpa ṣofo 80mm, bole 18,20,30mm, ipinnu to 6000ppr, awọn aṣayan 4 ti awọn ọnajade NPN/PNP olugba ṣiṣi, titari fa, awakọ laini ati iṣelọpọ foliteji; GI-H80 jara jẹ apẹrẹ fun awọn ohun elo to nilo iwapọ, pipe-giga, koodu koodu iṣẹ-giga. Fun esi tachometer, tabi awọn ohun elo iṣakoso iyara mọto, Awoṣe GI-H80 Series jẹ yiyan kooduopo to dara julọ. O jẹ koodu koodu nipasẹ-bore ti o wa ni ikanni ẹyọkan mejeeji (225A) ati awọn awoṣe quadrature (225Q) ti o pese ojutu idiyele-doko fun wiwọn irọrun. Awọn ẹya ara ẹrọ pẹlu ohun gbogbo-irin ile, a orisirisi ti asopo awọn aṣayan, ati ki o rọrun fifi sori nitori awọn thru-bore oniru, ṣe GI-H40 Series apẹrẹ fun julọ išipopada iṣakoso ati ẹrọ awọn ohun elo.

    ibeereapejuwe awọn
  • GMA-B Series BISS Multiturn Absolute Encoder

    GMA-B Series BISS Multiturn Absolute Encoder

    GMA-B Series kooduopo ni a BISS ni wiwo olona-Tan idi encoedr. BiSS-C jẹ ẹya tuntun ti BiSS. Awọn ẹya agbalagba (BiSS-B) jẹ pataki atijo. BiSS-C jẹ ohun elo ibaramu pẹlu SSI boṣewa ṣugbọn laarin iwọn data kọọkan oluwa kọ ẹkọ ati isanpada fun awọn idaduro laini ti n mu awọn oṣuwọn data 10 Mbit/s ati gigun okun to awọn mita 100. Data sensọ le ni “awọn ikanni” lọpọlọpọ nitoribẹẹ mejeeji alaye ipo ati ipo le jẹ gbigbe ni fireemu kan. BiSS-C nlo CRC ti o lagbara julọ (Afikun) fun wiwa awọn aṣiṣe gbigbe.Housing Dia.: 38,50,58mm; Iwọn Ipin Ọpa ti o lagbara / ṣofo: 6,8,10mm; Ipinnu: Nikan yipada max.1024ppr/max.2048ppr; Ni wiwo:Biss; Koodu Ijade: Alakomeji, Grẹy, Grey Excess, BCD;

     

    ibeereapejuwe awọn
  • GSA-C Series LE ŠI Nikan Tan Bus-orisun Absolute Encoder

    GSA-C Series CAN Ṣii Nikan Tan Bus-orisun Abso...

    GSA-C Series Encoder jẹ iyipada kan CANopen ni wiwo idi koodu, CANopen jẹ eto ibaraẹnisọrọ ti o da lori CAN. O ni awọn ilana-Layer ti o ga julọ ati awọn pato profaili. CANopen ti ni idagbasoke bi nẹtiwọọki ifibọ idiwon pẹlu awọn agbara iṣeto ni irọrun pupọ. O jẹ apẹrẹ ni akọkọ fun awọn ọna ṣiṣe iṣakoso ẹrọ ti o da lori išipopada, gẹgẹbi awọn eto mimu. Loni o ti lo ni ọpọlọpọ awọn aaye ohun elo, gẹgẹbi awọn ohun elo iṣoogun, awọn ọkọ oju opopona, ẹrọ itanna omi okun, awọn ohun elo oju-irin, tabi adaṣe ile.

    ibeereapejuwe awọn
  • GMA-S Series SSI Interface Olona-Tan Absolute Encoder

    GMA-S Series SSI Interface Olona-Tan idi...

    GMA-S Series idi koodu jẹ ẹya SSI multiturn idi kooduopo. Asopọmọra Serial Interface (SSI) jẹ aaye-si-ojuami nitorina awọn ẹrú ko le ṣe bussed papọ. SSI jẹ itọnisọna-ọkan, gbigbe data jẹ nikan lati ẹrú si oluwa. Nitorina ko ṣee ṣe fun oluwa lati fi data iṣeto ranṣẹ si ẹrú kan. Awọn iyara ibaraẹnisọrọ ni opin si 2 Mbits / iṣẹju-aaya.Ọpọlọpọ awọn ẹrọ SSI ṣe awọn gbigbe ilọpo meji lati mu ilọsiwaju ibaraẹnisọrọ pọ si. Oluwa ṣe afiwe awọn gbigbe lati ṣawari awọn aṣiṣe. Ṣiṣayẹwo Isọtọ (Afikun) tun mu wiwa aṣiṣe pọ si.SSI jẹ boṣewa alaimuṣinṣin ati ọpọlọpọ awọn ẹya ti o wa pẹlu aṣayan fun AqB ti o pọ sii tabi wiwo ẹṣẹ/cos. Ni yi imuse idi ipo ti wa ni nikan ka ni startup.Housing Dia.: 38,50,58mm; Iwọn Ipin Ọpa ti o lagbara / ṣofo: 6,8,10mm; Ipinnu: Nikan yipada max.16bits; Ni wiwo:SSI; Koodu Ijade: Alakomeji, Grẹy, Grey Excess, BCD; Ipese Foliteji: 5v, 8-29v;

     

    ibeereapejuwe awọn
  • GMA-M Series Modbus Bus-orisun Olona-Tan Absolute Encoder

    GMA-M Series Modbus Bus-orisun Olona-Tan Absolu...

    GMA-M Series kooduopo ni a Olona-Tan akero-orisunModbusencoder pipe, o le pese max 16bits kọrin-trun ipinnu, pẹlu awọn aṣayan ti ile Dia.: 38,50,58mm; Iwọn Ipin Ọpa ti o lagbara / ṣofo: 6,8,10mm, koodu Ijade: Alakomeji, Grey, Excess Grey, BCD; Ipese Foliteji: 5v, 8-29v; MODBUS jẹ ilana ibeere/fisi ati pe o funni ni awọn iṣẹ ti a ṣalaye nipasẹ awọn koodu iṣẹ. Awọn koodu iṣẹ MODBUS jẹ awọn eroja ti MODBUS ibeere/dahun PDUs. Idi ti iwe yii ni lati ṣe apejuwe awọn koodu iṣẹ ti a lo laarin ilana ti awọn iṣowo MODBUS. MODBUS jẹ Ilana fifiranṣẹ Layer ohun elo fun ibaraẹnisọrọ alabara / olupin laarin awọn ẹrọ ti o sopọ lori oriṣiriṣi awọn ọkọ akero tabi awọn nẹtiwọọki.

     

    ibeereapejuwe awọn
  • GMA-A Series Analog 0-10v 4-20mA Imujade Olona-Tan Ayipada pipe

    GMA-A Series Analog 0-10v 4-20mA O wu Olona-t...

    GMA-A Series Multi-Turn Analog Absolute Rotary Encoder jẹ apẹrẹ fun ọpọlọpọ awọn ohun elo ile-iṣẹ ti o nilo iṣelọpọ ipo pipe. Imọ-ẹrọ iṣelọpọ oni-nọmba rẹ ni kikun jẹ ki o jẹ yiyan ti o dara julọ fun gbogbo awọn ohun elo, paapaa awọn ti o ni wiwa giga ti ariwo.Eyi koodu pese awọn aṣayan 3 ti iṣelọpọ0-10v, 4-20mA, 0-10kWa pẹlu boya servo yika tabi iṣagbesori flange square, ati ọpọlọpọ awọn asopo ati awọn aṣayan cabling, GSA-A Series jẹ irọrun apẹrẹ sinu ọpọlọpọ awọn ibeere ohun elo. Pẹlu awọn oniwe-jakejado asayan ti ọpa titobi ni atilẹyin nipasẹ ise ite, NMB bearings, ati awọn oniwe-iyan IP67 asiwaju, o jẹ apẹrẹ fun alakikanju agbegbe.Housing Dia.: 38,50,58mm; Ri to / Afọju ṣofo Apa Iwọn Iwọn: 6,8,10mm; Ipinnu: Iyipada ẹyọkan max.16bits, MAX, 16bits titan, Lapapọ max:29bits;

     

    ibeereapejuwe awọn
  • GSA-M Series Nikan Tan Modbus Absolute Encoder

    GSA-M Series Nikan Tan Modbus Absolute Encoder

    GSA-M Series kooduopo jẹ kan nikan Tan akero-orisunModbusencoder pipe, o le pese max 16bits kọrin-trun ipinnu, pẹlu awọn aṣayan ti ile Dia.: 38,50,58mm; Iwọn Ipin Ọpa ti o lagbara / ṣofo: 6,8,10mm, koodu Ijade: Alakomeji, Grey, Excess Grey, BCD; Ipese Foliteji: 5v, 8-29v; MODBUS jẹ ilana ibeere/fisi ati pe o funni ni awọn iṣẹ ti a ṣalaye nipasẹ awọn koodu iṣẹ. Awọn koodu iṣẹ MODBUS jẹ awọn eroja ti MODBUS ibeere/dahun PDUs. Idi ti iwe yii ni lati ṣe apejuwe awọn koodu iṣẹ ti a lo laarin ilana ti awọn iṣowo MODBUS. MODBUS jẹ Ilana fifiranṣẹ Layer ohun elo fun ibaraẹnisọrọ alabara / olupin laarin awọn ẹrọ ti o sopọ lori oriṣiriṣi awọn ọkọ akero tabi awọn nẹtiwọọki.

     

    ibeereapejuwe awọn
  • GSA-S Series Nikan-Tan SSI Absolute Rotari Encoder

    GSA-S Series Nikan-Yipada SSI Absolute Rotari En...

     

    Asopọmọra Serial Interface (SSI) jẹ aaye-si-ojuami nitorina awọn ẹrú ko le ṣe bussed papọ. SSI jẹ itọnisọna-ọkan, gbigbe data jẹ nikan lati ẹrú si oluwa. Nitorina ko ṣee ṣe fun oluwa lati fi data iṣeto ranṣẹ si ẹrú kan. Awọn iyara ibaraẹnisọrọ ti wa ni opin si 2 Mbits / iṣẹju-aaya.Ọpọlọpọ awọn ẹrọ SSI ṣe imuse gbigbe ilọpo meji lati mu ilọsiwaju ibaraẹnisọrọ pọ si. Oluwa ṣe afiwe awọn gbigbe lati ṣawari awọn aṣiṣe. Ṣiṣayẹwo Isọtọ (Afikun) siwaju si ilọsiwaju wiwa aṣiṣe.SSI jẹ apewọn alaimuṣinṣin ti o jo ati pe ọpọlọpọ awọn ẹya ti a tunṣe wa pẹlu aṣayan fun AqB afikun tabi wiwo ẹṣẹ/cos. Ninu imuse ipo pipe ni a ka nikan ni ibẹrẹ.Ibugbe Dia.: 38,50,58mm; Iwọn Ipin Ọpa ti o lagbara / ṣofo: 6,8,10mm; Ipinnu: Nikan yipada max.16bits; Ni wiwo:SSI; Koodu Ijade: Alakomeji, Grẹy, Grey Excess, BCD; Ipese Foliteji: 5v, 8-29v;

     

     

    ibeereapejuwe awọn
  • GSA-B Series Nikan-Tan Biss Absolute Rotari Encoder

    GSA-B Series Nikan-Tan Biss Idi Rotari E...

    BiSS-C jẹ ẹya tuntun ti BiSS. Awọn ẹya agbalagba (BiSS-B) jẹ pataki atijo. BiSS-C jẹ ohun elo ibaramu pẹlu SSI boṣewa ṣugbọn laarin iwọn data kọọkan oluwa kọ ẹkọ ati isanpada fun awọn idaduro laini ti n mu awọn oṣuwọn data 10 Mbit/s ati gigun okun to awọn mita 100. Data sensọ le ni “awọn ikanni” lọpọlọpọ nitoribẹẹ mejeeji alaye ipo ati ipo le jẹ gbigbe ni fireemu kan. BiSS-C nlo CRC ti o lagbara julọ (Afikun) fun wiwa awọn aṣiṣe gbigbe.Housing Dia.: 38,50,58mm; Iwọn Ipin Ọpa ti o lagbara / ṣofo: 6,8,10mm; Ipinnu: Nikan yipada max.1024ppr/max.2048ppr; Ni wiwo:Biss; Koodu Ijade: Alakomeji, Grẹy, Grey Excess, BCD;

    ibeereapejuwe awọn
  • GSA-PL jara, Nikan Tan Parallel Absolute Encoder

    GSA-PL jara, Yipada Nikan Ni afiwe Absolute En...

    GSA-PL Series parallel encoder pipe pipe jẹ apẹrẹ fun ọpọlọpọ awọn ohun elo ile-iṣẹ ti o nilo kooduopo pẹlu agbara ti iṣelọpọ ipo pipe. Imọ-ẹrọ iṣelọpọ oni nọmba ni kikun jẹ ki o jẹ yiyan ti o dara julọ fun gbogbo awọn ohun elo, ni pataki awọn ti o ni wiwa giga ti ariwo. Wa pẹlu boya servo yika tabi iṣagbesori flange square, ati ọpọlọpọ awọn asopo ati awọn aṣayan cabling, GSA-PL Series jẹ irọrun apẹrẹ sinu ọpọlọpọ awọn ibeere ohun elo. Pẹlu awọn oniwe-jakejado asayan ti ọpa titobi ni atilẹyin nipasẹ ise ite, NMB bearings, ati awọn oniwe-ipin IP67 asiwaju, o jẹ apẹrẹ fun alakikanju agbegbe.Housing Dia.: 38,50,58mm;Solid / hollow Shaft Dimeter: 6,8,10mm; Ipinnu: Max.16bits Interface: Parallel; Koodu Ijade: Alakomeji, Grẹy, Grey Excess, BCD;

    ibeereapejuwe awọn
  • GPI Series Programmerable Incremental Rotari Encoder

    GPI Series Programmerable Incremental Rotari Encoder

    Gertech le funni ni koodu koodu afikun ti eto pẹlu sọfitiwia ati awọn kebulu asopọ, Onibara le ṣe eto ipinnu lori PC funrararẹ; Onibara le ṣeto ipinnu si iye eyikeyi lati 0-4096ppr; awọn aṣayan ti ile Dia.: 38,50,58mm; Ri to ati afọju ṣofo ọpa wa (ọpa / boleDiameter: 6,8,10mm); Ọna kika: HTL,TTL; Ifihan agbara ti o wu: AB / ABZ / ABZ & A- B- Z-;

    ibeereapejuwe awọn
  • GI-HK Series Optical Encoder Kit Housing Dimeter:30mm; Iwọn Ipin Ọpa ti o lagbara / ṣofo: 3-10mm;

    GI-HK Series Optical Encoder Kit Housing Diamet...

    GI-HKSeries Optical Encoder Apo ti ile 30mm, bole 3-10mm jẹ apẹrẹ fun jẹ apẹrẹ fun awọn ohun elo to nilo ga konge, ga išẹ encoder. Ti a ṣe apẹrẹ fun aaye fifi sori opin, le ṣakoso to ibeere ipinnu ipinnu 10001ppr. O le pese Imujade Foliteji, Iyatọ Iyatọ Awọn aṣayan meji ti jade, ifihan agbara ti A B ati ABZ awọn aṣayan meji; GI-HK Series encoder afikun ti wa ni lilo ni ọpọlọpọ awọn aaye ti iṣakoso adaṣe ati eto wiwọn, gẹgẹbi iṣelọpọ ẹrọ, awọn ẹrọ iṣoogun, aṣọ, titẹ sita, ọkọ ofurufu, ẹrọ idanwo ile-iṣẹ ologun, elevator, bbl

    ibeereapejuwe awọn
  • GI-H100 Series 100mm Housing Hollow Shaft Incremental Encoder

    GI-H100 Jara 100mm Ọpa Hollow Hollow

    GI-H100 Series Nipasẹ ṣofo ọpa koodu afikun afikun pẹlu ile 100mm, bole 30,32,38,40,45mm jẹ apẹrẹ lati baamu taara lori boya motor tabi ọpa miiran nibiti ipo, itọsọna, tabi alaye iyara ti nilo. Ẹrọ itanna orisun Opto-ASIC ti ilọsiwaju pese ajesara ariwo ti o ga julọ pataki ni ọpọlọpọ awọn ohun elo ile-iṣẹ. H100 Series ni irọrun ṣe ẹya iru idimole kan fun gbigbe ni iyara ati irọrun lori titobi nla ti awọn iwọn ọpa. Ohun iyan egboogi-yiyi flex òke ntẹnumọ ile iduroṣinṣin.

    ibeereapejuwe awọn
<< <Ti tẹlẹ123Itele >>> Oju-iwe 2/3
Lu tẹ lati wa tabi ESC lati tii